TekNite was developed in response to customer demand for a more easily applied gunite with improved adhesion.
TekNite can be applied via a variety of Minova approved electrical, air-powered and hydraulic-powered equipment.
When pumped wet, TekNite has a pumping life of up to 30 minutes and sets in 5 to 8 hours. TekNite is especially suited for large remediation or preventative sealing.
TekCrete Fast was developed in response to customer demand for a shotcrete (gunite) with effectively immediate strength on application. TekCrete Fast may be used with or without steel or polymer mesh, although the use of mesh will provide additional tensile and flexural strength.
Fiber reinforced, this product offers superlative adhesion characteristics with typical compressive strengths over 11,000 psi. It is ideally suited for use where immediate structural strength is required.
Binding broken base material together for better structural integrity, TekCrete Fast can be used anywhere where conventional shotcrete (gunite) is used and with any coating or sealant. It performs best when applied as soon as possible after the base material is exposed. Including rebound, TekCrete Fast has a surface coverage of approximately 8.2 ft2 per 60lb. bag at an application thickness of 1⁄2“.
Tekcrete™ Pro 1500 is ideal for large vertical and overhead structural repairs where a rapid hardening product is needed.
Supplied as a ready to use dry powder, formulated for dry mix shotcrete requiring only the addition of water.
The controlled set feature allows 10-15 mins of working time for troweling if needed. Very high early and ultimate compressive strengths are achievable. Each 60 lb bag of TekCrete Pro 1500 contains approximately 0.45 cubic feet of material.
Supplied as a ready to use dry powder, formulated for dry mix shotcrete (Gunite) requiring only the addition of water.
The required low water-to-cement ratio ensures high early (and ultimate) strengths.
TekCrete Pro's shrinkage compensation minimizes stress at the bond line. It may be applied wet but ask Minova for guidance. Each 60lb bag of TekCrete Pro contains approx. 0.45 cubic feet of material.