Celbex 653 is a blend of water-soluble, high molecular-weight polymers supplied as a white powder.
It is designed to provide a stable polymer matrix enveloping every cement particle, which functions as a protective coating and thus prevents water washout.
Celroc P is a high-strength, non-shrink, non-metallic grout consisting of rapid hardening hydraulic cement and super plasticizer. Designed to produce a pumpable grout at low w/c ratios with the unique features of being highly resistant to dilution in moving water and aggressive ground conditions.
TekGrout® is a single-component, variable strength cementitious injection grout designed as an alternative to polyurethane systems.
A wide flexibility with strengths and viscosities enables excellent strata penetration and gel times as low as 40 seconds. The material’s adhesive and interlocking characteristics collectively assure a solid bond.
Terraset® grout is a low-viscosity, chemical grout system used for ground consolidation and stabilization of foundations and footings located on fine to medium sands. Other important uses include control of water inflow into shafts and tunnels during excavation, pre-grouting of TBM/EPBM tunnel headings, formation of impervious grout curtains to contain pollution by hazardous waste, and cut-off walls into alluvial deposits at dam sites.
The Terraset® System is a completely water soluble process consisting of two components:
On a volume basis, the amount of Terraset® Component B - hardener needs to range from 10% to 15% based on the sodium silicate concentration. The higher hardener concentration gives the most durable gels. Gel time of the mixed grout solution is approximately 12 minutes at 70°F. The resulting gels are homogeneous, dense and well structured.