Tekcrete™ Pro

Tekcrete™ Pro is a specially formulated blend of micro-silica enhanced cement and carefully graded aggregates which when mixed with water results in a high build, dense, low absorption shotcrete mortar.
Supplied as a ready to use dry powder, formulated for dry mix shotcrete (Gunite) requiring only the addition of water.
The required low water-to-cement ratio ensures high early (and ultimate) strengths.
TekCrete Pro's shrinkage compensation minimizes stress at the bond line. It may be applied wet but ask Minova for guidance. Each 60lb bag of TekCrete Pro contains approx. 0.45 cubic feet of material.

Advantages
- 1 Low permeability
- 2 Fiber reinforced
- 3 High build
Product Features
High build – allowing a large thickness to be sprayed in a single pass
Shrinkage compensated – minimizes shrinkage cracks and internal stresses at the bond surface
Low permeability – provides protection against carbon dioxide gas and is classified as “very low” for chloride permeability
Low rebound – minimizes waste
Workable– the combined high build, controlled set feature provides an open time to allow trowel finishing
Chloride free – composition allows the development of high strength without the use of chlorides.
Reliability – factory quality controlled materials proportioning, mixing and packaging ensures consistency bag after bag
Fiber reinforced – synthetic fibers to further reduce cracking potential
Relatively fine aggregate – carefully graded to allow easier finishing and allow thinner layers
Industry sectors
-
Coal Mining
-
Hard Rock Mining
-
Construction
Common use
- Ground control
- Material bonding
- Special construction
- Structural repair and reinforcement
- Surface control
Available Regions
- North America
- South America