Capcem™ PCB Fast

Capcem™ PCB Fast is a single component cementitious powder that is mixed with water

Capcem™ PCB Fast is a pumpable grout for pre-grouted installation of cable anchors.

It is supplied in lined, woven polypropylene bags. The mixed grout is intended for placement in holes through a suitable grout pump.

1 Cement based: no resins or solvents
2 Pumpable into up-holes at least 6 m long
3 High pH inhibits corrosion

Features

Cement based product with no resins or solvents
Working time from mixing to insertion of cable anchor: minimum 30 minutes, mixing water at 25°C
Rapid strength gain after placement
No shrinkage or bleed water

Product Options

Packaged in 10 kg or 25 kg bags. Each pallet is shrink wrapped to protect the product against damage.

Industry sectors

Coal Mining
Hard Rock Mining

Common use

Anchoring
Ground control
Grouting

Available Regions

Africa

Downloads

Related products

Rock Bolts

We offer a comprehensive range of reinforcement and support solutions that control and stabilise rock in excavated or unstable areas.

Lokset™ Resin Capsules

Lokset™ Resin is a two-component resin capsule used in mining and construction industries.

Capcem™ UWP

Capcem™ UWP is a non-shrink cementitious underwater pumping and fissure injection grout to seal wet or underwater substrates without significant ‘wash-out’ of the cement phase. Applications include crack and fissure sealing in mining and drilling operations and underwater concrete repair.