Lokset® Original

ORIGINAL CAPSULE. SINGLE SPEED.

Lokset capsules are filled with a reinforced thixotropic polyester resin in one compartment and a catalysed mastic filler in the other, separated by a physical barrier. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.

Product Features

• Easy to install, requiring no specialty injection equipment

• Resistant to anchoring failure caused by blasting or vibration

• Rapid anchoring of the bolt to the surrounding strata

• High load transfers achievable almost immediately

• Full column bonded bolts strongly resist the horizontal and lateral strata movement associated with convergence

• Provides strength and rigidity to prevent sag

• Acts as a reinforcement that clamps the individual strata layers into a single high strength beam

• Effectively seals wet, dripping holes and in most cases eliminates deterioration of the hole and surrounding strata

• Unaffected by sea or fresh water, mild acids or mild alkaline solutions

• Immediately fixes rock bolts / anchors

• Protects bolts from corrosion, can be used in wet/underwater condition

• 4 Months shelf life

Configurations

Typical insertion properties at 25°C Approximate spin time in seconds Minimum hold time in seconds

Product Options

• Lokset Original - SKU NF0000094, Medium speed, 500mm L x 25mm D

• Lokset Original - SKU NF0000096, Medium speed, 600mm L x 25mm D

• Lokset Original - SKU NF0000097, Slow speed, 600mm L x 36mm D

• Lokset Original - SKU NF0000099, Medium speed, 650mm L x 25mm D

• Lokset Original - SKU NF0000100, Slow speed, 650mm L x 25mm D

• Lokset Original - SKU NF0000388, Fast speed, 440mm L x 25mm D

• Lokset Original - SKU NF0000395, Slow speed, 600mm L x 25mm D

• Lokset Original - SKU NF0000397, Fast speed, 650mm L x 26mm D

• Lokset Original - SKU NF0004633, Fast speed, 700mm L x 25mm D

The quality of Lokset resin capsule is assured through a four part quality control program

• Raw Material Testing

• In process quality control testing

• Finished Product acceptance testing

• Quality system management to ISO 9001