Lokset® Long Tendon

LONG TENDON SUPPORT.
Specially formulated resin mastics to aid insertion where long tendon support is required. This range was developed for use with all resin anchored cable bolts and includes F-Series and J-Series capsules. J-Series capsules are used as an anchoring support in strata where larger annular gaps between bolt and hole diameters are encountered with long tendon strand cables.
Can be used with a range of long tendon support cables and include; SuperStrand cables, Flexibolts, Spinbolts, Megabolts, and Cable bolts.
Uses include intersections, cut throughs, long life roadways, secondary and additional primary support

Advantages
- 1 SLOW SET CAPSULE
- 2 FULL ENCAPSULATION WITH PRE-TENSIONING
- 3 LONG TENDON SUPPORT
Features
Aids mixing in larger annular gaps due to a specially formulated resin mastic and catalyst
Rapid strength build up, bolt will take load almost immediately
A unique design of capsule configuration enabling extremely effective mixing of resin mastic and catalyst compartments
Point anchor installation with slow set capsule
Full encapsulation with pre-tensioning utilising combination of slow and extra slow speeds.
Full encapsulation without pre-tensioning using extra extra slow set capsule speed
Eliminates the need for costly and time consuming post grouting by completing full bolt encapsulation in single operation
High compressive strength, strong, rapid and consistent anchorage
High modulus
Rapid insertion, easy and quick to use
Protects bolt from corrosion, can be used inmoderately wet conditions
No expansion stresses, can be used in weak strata
4 Months shelf life
Configurations
CAPSULE SPEED | CAPSULE CODE | CAPSULE COLOUR | SPIN TIME* | HOLD TIME* |
---|---|---|---|---|
FR Slow | FRS | Light Green/Blue | 20 s | >120 s |
FR Extra Extra Slow | FRXXS | Light Green/Blue | 20 s | >1200 s |
J-Series Slow | S | Blue | 20 s | >60 s |
J-Series Medium | M | Red | 12 s | >20 s |
Typical insertion properties at 25°C Approximate spin time in seconds Minimum hold time in seconds
Product Options
Lokset J Series - SKU NF0000085, Medium speed, 1,000mm L x 36mm D
Lokset J Series - SKU NF0000086, Medium speed, 1,000mm L x 36mm D with retainer
Lokset J Series - SKU NF0000088, Slow speed, 1,000mm L x 36mm D with retainer
Lokset J Series - SKU NF0000090, Slow speed, 600mm L x 45mm D with retainer
Lokset J Series - SKU NF0000336, Medium speed, 800mm L x 36mm D
Lokset J Series - SKU NF0000598, Slow speed, 1,000mm L x 36mm D with bag
Lokset J Series - SKU NF0004670, Medium speed, 1,000mm L x 36mm D with retainer & bag
Lokset F Series - SKU NF0000318, FRXX Slow, 1,000mm L x 25mm D
Lokset F Series - SKU NF0004408, FRXX Slow speed, 880mm L x 25mm D with retainer
Lokset F Series - SKU NF0004609, Slow speed, 1,000mm L x 38mm D
The quality of Lokset resin capsule is assured through a four part quality control program
Raw Material Testing
In process quality control testing
Finished Product acceptance testing
Quality system management to ISO 9001
Industry sectors
-
Hard Rock Mining
Common use
- Roof control
- Anchoring
- Long tendon support
Available Regions
- Australia and New Zealand (ANZ)
- Asia