Resin Bolts Type RM-20 and POK-22

Resin Bolts Type RM-20 and POK-22 are used for roof and ribs support in mine working areas as an independent or additional roof support system. They are also used to suspend various components of mining equipment.

RM-20 bolt is a steel reinforcing bar of nominal diameter dn=20 mm, while POK-22 bolts have a nominal rod diameter of dn=22 mm according to PN-82/H93215. They are made of 34GS steel.

Product Image
Product Image
Advantages
  • Suitable for use at low mining headings
  • Big variety of nuts and washers available
  • Split bolt version can be made
Product Features
  • Finished RM-20 rods have a rolled top of ø16 mm beveled to 12 mm
  • POK-22 rods have a square 12 x 12 mm end. Such ends allow the rod to be turned in the hole
  • The bolts can be used with a square washer, square washer with a side hole or round washer
  • Washers are made of 6mm plate
  • Certificate issued by Central Mining Institute in Katowice - safety mark No. B/1194/V/2017

Product Options
  • RM20
  • POK- 22

Related Products

Minova Image

Resin Bolts Type APP APG APB

AP bolts are modern design anchors with a load capacity of up to 300 kN and a nut locking system (shear pin). The anchors can be used with three types of washers; a square washer, a round washer or a square washer with an eyelet made of 8 or 10 mm plate.
Minova Image

Resin Bolts Type RM-18

The anchor rods are ribbed reinforcing bars of dr=18.2 mm made of AP 600 steel according to ZN-95/AP-3 standard.

RM rods are divided into the following types:

  • RM -18
  • RMn -18

Resin bolt type RM-18 in a split/chamfered version can be made of stainless or acid resistant steel.
Minova Image

Lokset™ Products

We have manufactured Lokset resin capsules since the late 1960's and are the leading supplier and innovator in this field. Our development and manufacturing ensures security of supply, service and support.

The Lokset system consists of an easily handled cartridge, containing a highly reinforced polyester resin component, together with its catalyst, in accurately measured quantities. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.

The Lokset resin capsule series is available in multiple configurations of single/double length combinations, diameter, set time, set time combinations, viscosity and shelf life.

 

Did you know?

The oldest reference Minova has for Lokset® resin anchors was the strengthening of the London Heathrow Airport road access tunnel in 1963 to allow heavy jets to land. Since then there have been numerous applications across the world in mining applications, highway tunnels, civil applications and a submarine base.

Copyright Minova  All rights reserved.