Ekopur LS/G

Ekopur LS/G is a polyurethane sprayed membrane used for protection, insulation and sealing of sidewalls and ceilings, insulation of dams and roof support components. Ekopur LS/G is especially recommended as a base, ground layer before spraying other systems.

This PU system is obtained after mixing component A (poliols and additives) and component B (polymeric MDI isocyanate with additives) in a volume ratio of 1:1. Its properties allow to use the systems under various geological and mining conditions.

Product Image
Product Image
Advantages
  • Excellent adhesion to various rock substrates
  • Very good hydro- and gas-insulation
  • Anti-electrostatic properties
Product Features
  • It has the (PZH) Hygienic Assessment certificate
  • It reaches a desired strength in a short time
  • It does not increase the endogenous fire risk
  • It can react in contact with salt rock or in presence of salt

Product Options
  • The components are packed into barrels/canisters with a capacity of 20 or 30 liters.

Related Products

Minova Image
Minobond Pumpable Grouts

We offer two different products within this category, that vary in setting speeds and application area.

Minobond AM is an anchoring mortar used for the grouting of steel parts in horizontal and vertical concrete surfaces and the filling of scratches, cracks, joints and deficiencies of concrete.

Minobond APS is a single component highly fluid rapid setting grout, designed especially for APS sewer manhole repair, whilst it is also used for filling backfill voids.

 

 

View Product
arrow arrow
Minova Image
Pianocem B

Pianocem B is applied with standard machines commonly used for the supply of cement binders, e.g. pump units MONO WT 820, MONO WT-820/1.

Pianocem B is a mineral foam, which is produced at the application site by mixing the powder material with water and air at the water/powder ratio ranging from 1:1 to 2:1.

After blending with the appropriate amount of water and foaming in a suitable machine, it sets to become a durable foam.

View Product
arrow arrow
Minova Image
FT-30

When mixed with water, the material sets within minutes. It creates a coating with instant resistance to pulling off and delamination caused by active leaks of water. It is particularly recommended for areas with high moisture content or highly watered.

View Product
arrow arrow