CT-EP

CT - EP is a ECC fine repair mortar in CT-95 concrete repair system.

Repair mortar CT-EP is a three-component material, ready-to- use after mixing all components. CT-EP is a fine cement-based mortar modified with rheology modifiers and epoxy dispersion (ECC). The material is dedicated for manual repairs of concrete surface as well as for spraying method. CT-EP is a part of CT-95 Concrete Repair System.

Product Image
Advantages
  • Perfect consistency and workability
  • Resistant to poor conditioning
  • Rapid strength development
Product Features
  • Excellent final strength
  • Excellent adhesion to concrete (green or hardened; moisturized or dry)
  • Watertight, permeable for vapour
  • Minimal rebound during spraying
  • Resistant to aggressive environment
  • Liquid components can be used as a strengthening primer for low strength, porous concrete

Product Options
  • CT-EP is supplied in 25 kg valve sack, 40 bags per pallet

Related Products

Minova Image

CT-6

Repair Mortar CT-6 is a one-component material, ready-to- use after mixing with batched water. CT-6 is a cement-based mortar with high quality aggregate up to 8 mm and modified with additives and polymers (PCC / SPCC). The material is dedicated for wet-process spraying as well as for manual repairs of concrete. CT-6 is a part of CT-95 Concrete Repair System.

CT-6 is used for:

  • Repair and reconstruction of concrete and reinforced concrete
  • Sealing and reinforcing of sidewalls, floor and roof of mining excavations, reservoirs and tunnels
  • Structural concrete repair in aggressive environment
    • Wet spray concrete
Minova Image

CT-2

This one-component material is a dry-mix of a cement-based mortar modified with additives and polymers (PCC / SPCC), with high quality aggregate up to 2 mm and reinforced with PE fibre. The product is ready-to-use after mixing with batched water.

CT-2 is part of the CT-95 Concrete Repair System.
Minova Image

CT-P

Repair mortar CT-P is a one-component material, ready-to- use after mixing with batched water. CT-P is a cement-based mortar with high quality fine aggregate up to 0,5 mm and modified with additives and polymers (PCC / SPCC). The material is dedicated for wet-process spraying as well as for manual repairs of concrete surface. CT-P is a part of CT-95 Concrete Repair System.

Copyright Minova  All rights reserved.