Capcem™ PS

Capcem™ PS pre-stressing grout is a single component grout product for monolithic packing and pre-stressing of timber packs and timber props.

It is rapid hardening, single component cements used primarily for timber pack pre-stressing.

Mixed with the correct quantity of water as tabulated, the grout has a pumping life of 20 minutes minimum at 25°C and are designed to gel within a few minutes after placement.

Product Image
Advantages
  • High volume yield
  • Non-flammable and nontoxic
  • Rapid setting allows blast to be taken in the same shift
Features
  • Single component system that allows the use of simple placing equipment
  • Suitable for use with our MK 1 pneumatic pump
  • Its high volume yield improves cost effectiveness and minimises transport requirements
  • Formulated to have <1% bleed water after 30 minutes
  • The grouts should be used with our non-weeping pre-stressing bags

Product Options
  • Capcem™ PS1 is supplied in a 13 kg bag
  • Capcem™ PS2 is supplied in a 11 kg bag

Related Products

Minova Image
Rock Bolts

We provide you with solutions for both active and passive methods of rock support wherever you are.

Our products range from various steel and Glass Fibre Reinforced Polymer (GFRP) bolts to steel arches, meshes and shotcretes.

Our offering can help you with:

  • Roof and ground control
  • Slope stabilisation
  • Rock fall
  • Permanent and temporary rock bolting
  • Spiling
  • Converging/yielding areas

Bolts alone may not be enough.

Many applications require additional components to ensure the desired results.

We provide steel and GFRP accessories that work in combination with our products for you to achieve the best outcomes. From drill bits, couplings, meshes to plates and nuts and trusses. Our portfolio works to provide you with the right solutions wherever you are.

View Product
arrow arrow
Minova Image
Lokset™ Resin Capsules

Lokset capsules are filled with a reinforced thixotropic polyester resin in one compartment and a catalysed mastic filler in the other, separated by a physical barrier. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.

View Product
arrow arrow
Minova Image
Capcem™ PLG

This product is a single component cementitious powder that is mixed with water. It is supplied in 25 kg lined, woven polypropylene bags. The mixed grout is intended for placement through a suitable grout pump.

View Product
arrow arrow