Capcem™ PCB Fast is a single component cementitious powder that is mixed with water
Capcem™ PCB Fast is a pumpable grout for pre-grouted installation of cable anchors.
It is supplied in lined, woven polypropylene bags. The mixed grout is intended for placement in holes through a suitable grout pump.
Cement based: no resins or solvents
Pumpable into up-holes at least 6 m long
High pH inhibits corrosion
Cement based product with no resins or solvents
Working time from mixing to insertion of cable anchor: minimum 30 minutes, mixing water at 25°C
Rapid strength gain after placement
No shrinkage or bleed water
Packaged in 10 kg or 25 kg bags. Each pallet is shrink wrapped to protect the product against damage.
We provide you with solutions for both active and passive methods of rock support wherever you are.
Our products range from various steel and Glass Fibre Reinforced Polymer (GFRP) bolts to steel arches, meshes and shotcretes.
Our offering can help you with:
Roof and ground control
Permanent and temporary rock bolting
Bolts alone may not be enough.
Many applications require additional components to ensure the desired results.
We provide steel and GFRP accessories that work in combination with our products for you to achieve the best outcomes. From drill bits, couplings, meshes to plates and nuts and trusses. Our portfolio works to provide you with the right solutions wherever you are.
Lokset capsules are filled with a reinforced thixotropic polyester resin in one compartment and a catalysed mastic filler in the other, separated by a physical barrier. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.
It is supplied as a ready-to-use dry powder requiring only the addition of water to produce a free flowing, non-shrink grout which exhibits exceptional resistance to ‘washing-out’ of the cement phase when placed in stationary or moving water.
The material is a mixture of specially processed cements. Additives impart controlled expansion, water reduction, non-washout characteristics and aid uniform mixing, minimising segregation and bleeding whilst assisting the flow characteristics.