TEKTHIX®

It is designed specifically for anchoring bolts and dowels in concrete, rock, brick and masonry.

Anchortite resists oil, grease, fats, mild acids, and alkalies, fresh and salt water. Where exposure to a specific chemical is anticipated, consult Minova directly.

Anchortite is used for grouting high strength anchor bolts, starter bars in concrete and anchors in rock.

Suggested applications for Anchortite include:

• Light and heavy rail track anchoring,
• Setting of highway lighting standards,
• Anchoring of precast median barriers and signs on highways.
• Handrails, guardrails and pipe protection stands around safety areas

CarboThix™ Fast is an immediate partially stiffening and very fast curing dual component silicate resin for bonding injection drilling anchors, also for rock stabilization and water sealing. CarboThix Fast was developed to improve the productivity of ground support installation in underground mining and tunnelling applications. Using the pumpable resin enables loads to be taken up in minutes rather than the typical 24 hours from cementitious grouted systems. Typical applications of CarboThix Fast include grouting of cable bolts, steel or GFRP bolts, and sealing of roof bolts.

During application, the two components are intimately mixed and achieve a grease-like viscosity (the Thix effect), so that the grout stops flowing and cures to form a tough elastic and non-porous resin that will not mix with water or be diluted in wet holes. Together they form an interpenetrating network, as a tough elastic non-porous silicate resin. The resulting viscous emulsion will not take up any additional water (from the rock), will not mix with water and is resistant to dilute acids and alkalis as well as fats.

As the system is under pump pressure, some grout is pushed into minor cracks and fissures around the anchor hole, ensuring full encapsulation of the anchor. As the two resin components are mixed at a set volume, consistent mixing of the grout is guaranteed, an advantage over cementitious grouts. This delivers a reliable quality of grout and anchoring performance.

Operator safety and handling issues are also improved over cementitious grouting systems. As a pumpable resin system, CarboThix Fast can be handled over long distances (up to 500 m) improving operational flexibility.

CarboThix 2 / Standard is an instantly thickening fast curing dual component silicate resin for high strength bonding of bolts and cable anchors. CarboThix 2 / Standard was developed to improve the productivity of ground support installations in underground mining and tunnelling applications. Using the pumpable resin enables load to be taken up in minutes rather than the typical 24 hours from cementitious grouted systems.

Typical applications of CarboThix 2 / Standard include sealing of injection bolts, steel or GFRP rods, and sealing of roof bolts. During application, the two components are intimately mixed and achieve a grease-like viscosity (the so called Thix effect) so that the grout stops flowing and cures to form a tough elastic and non-porous resin that will not mix with water or be diluted in wet holes. CarboThix 2 / Standard is resistant to dilute acids and alkalis as well as fats. As the system is under pump pressure, some grout is pushed into minor cracks and fissures around the anchor hole, ensuring full encapsulation of the anchor.

As the two resin components are mixed at a set volume, consistent mixing of the grout is guaranteed, an advantage over cementitious grouts. This delivers a reliable quality of grout and anchoring performance. Operator safety and handling issues are also improved over cementitious grouting systems. As a pumpable resin system, CarboThix 2 / Standard can be handled over long distances (up to 500 m) improving operational flexibility.

Celroc P is a high-strength, non-shrink, non-metallic grout consisting of rapid hardening hydraulic cement and super plasticizer. Designed to produce a pumpable grout at low w/c ratios with the unique features of being highly resistant to dilution in moving water and aggressive ground conditions.