Terraset System - Minova Global
The Terraset® System is a complete process consisting of two components:
Terraset® Part A Sodium Silicate Grout (50 gal) Terraset® Part B Hardener (5 gal)
Both parts are completely water soluble. On a volume basis, the amount of Terraset® Part B hardener needed ranges from 10% to 15% based on the sodium silicate concentration. The higher hardener concentration gives the most durable gels. Gel time of the mixed grout solution is approximately 12 minutes at 70°F. Terraset® Part B hardener obtains predictable gel times over a wide range of temperatures when mixed with Terraset® Part A sodium silicate. The resulting gels are homogeneous, dense and well structured.
- Adaptable – Mix concentrations allow project-specific formulation; low viscosity enables maximum strata penetration, minimal product waste.
- Chemical Resistivity – Unaffected by acids, alkalis, salts and hydrocarbons; resistant to fungi, bacteria and hydrocarbons.
- Low Viscosity – 2 to 5 cps enables maximum permeation into fine sands and fine cracks.