CarboLith PL - Minova Global

TekSeal Family of Products

Sealing or Stopping: Gas or Liquids

CarboLith PL

CarboLith PL

Description

CarboLith PL is a three component system, the curing time of which can be adjusted by the addition of com-ponent C.

Components

CarboLith PL component A is a special water-glass component (aqueous sodium silicate) with additives. Component B is a modified polyisocyanate. Component C is a blend of additives improving the components and regulating the pot life of the mix. 

System

The curing of component A results in a silicate; simultaneously a solid polyisocyanurate/polyurea is formed from the component B. 

Final product: 

Together they form an interpenetrating network, a tough-elastic, non-foamed silicate resin (organomineral resin) 

In conjunction with Advantex® glass, a properly placed short liner can endure multiple washings with 120 bar (1700 psi) (at the nozzle) without significant damage even after only 3 days curing.6 Please note for safety reasons that you must limit the pressure at the rising nozzle on 80 bar (1130 psi) (water temperature < 20 °C, not longer than 3 min in a place) 

  • It is resistant against acids and alkali (24 hours storage in 10 % sulphuric acid or 5 % caustic soda)2,7, like-wise against a multiplicity of organic and inorganic liquids such as gasoline, diesel and mineraloils.
  • It complies with the German requirements for large and small scale seals in drinking water.
  • Also after 200000 changes of “Darmstädter Kipprinne” the short placed short liner was waterproof

Industry Sectors


Tunnelling


Geotechnical

Common Uses


Sealing

Downloads

Technical Data Sheet
Safety Data Sheet (Comp A)
Safety Data Sheet (Comp B)



// ]]>