Lokset® TOOSPEEDIE® Resin Cartridges - Minova Global

LOKSET® TOOSPEEDIE® Resin Cartridges


The Lokset TOOSPEEDIE Resin Cartridges consists of accurately proportioned fast and slow speeds, reinforced, thixotropic polyester resin mastic in one compartment. The other compartment contains an organic peroxide catalyst separated by a physical barrier. The cartridge is available in either a 40:60 or 50:50 ratio of fast:slow speeds. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.

Lokset TOOSPEEDIE Resin Cartridges are available in multiple set time ratios, as designated by the product codes. Combinations of set times are possible using any of Minova’s resin mastic formulations.



50% fast set, 50% slow set


40% fast set, 60% slow set

Typical code



50% fast set (F), 50% slow set (S)


Capsule length (1200 mm)


Capsule diameter (25 mm)


A specially formulated resin mastic and catalyst paste to give:

  • Higher compressive strength

  • Higher modulus

  • Higher push and pull out strengths

  • Shorter installation times

  • Unaffected by vibration

  • No expansion stresses, can be used in weak strata

  • Protects bolt from corrosion, can be used in wet or underwater conditions

Fast and slow speeds each colour coded in one capsule provides the following advantages:

  • Reduced handling

  • Reduced wastage

  • Rapid insertion, easy and quick to use

  • Helps ensure fast end of capsule inserted first

  • Guarantees both fast and slow set capsules are installed

  • Both speeds compatible giving reduced back pressure and easier penetration

  • No plastic or cardboard joiners required

  • Allows roof bolt to be pre-tensioned quickly

  • A unique design of capsule configuration enabling extremely effective mixing of resin mastic and catalyst compartments

Industry Sectors

Coal Mining

Hard Rock Mining


Common Uses

Roof Bolting


Technical Data Sheet
Safety Data Sheet

// ]]>