Lokset® A-, B- or E-Series Resin Cartridges - Minova Global

Lokset® A-, B- and E-Series Resin Cartridges

Description

The Lokset® A-, B- and E-Series Resin Cartridges were specifically designed to be used in conjunction with #6 (3/4”)-A, #5 (5/8”)-B or #7 (7/8”)-E steel roof bolts in 1”(A/B) or 1-3/8"(E) boreholes. The principal applications for these Series of Lokset® Resin Cartridges include fully grouted rebar, tension rebar, doweling and resin-enhanced mechanical anchors.

In most applications, Lokset® Resin Cartridges can enhance the performance of your current roof control system. The Lokset® cartridge consists of two compartments separated by a physical barrier. One compartment contains a polyester resin mastic and the other an organic peroxide catalyst. The rotation of the bolt during installation ruptures the cartridge, shreds the film and mixes the two components, thus causing a chemical reaction which transforms the resin mastic to a rock solid anchor.

Advantages



Proven


Strong


Rigid

  • Proven - Since our introduction of resin anchors to the United States in 1971, Lokset® Resin Cartridges have a proven record of success 
  • Strong - When used properly, Lokset® Resin Cartridges consistently surpass the strength of the bolt or the surrounding strata, whichever is weaker 
  • Rigid - Through innovative product engineering and manufacturing, the A Series Lokset® Resin Cartridge is stiff and easy to handle during installation 
  • Variety - The Lokset® A-, B- and E-Series Resin Cartridges are available in a wide variety of lengths and speeds which will satisfy most applications
  • Viscosity – The Lokset® A-, B- and E-Series Resin Cartridges are available in High, Medium and Low Insertion Force (LIF) viscosities
    • The LIF formulation is unique in the industry and provides optimum performance with cable and mechanical assisted resin point anchor rock bolts

 

  • Technical Differences
    • A-Series:
      • 23mm (7/8") diameter, lengths ranging from one to seven grouted feet
      • For use with #6 (3/4”) roof bolts in 25mm (1") boreholes
    • B-Series:
      • 23mm (7/8") diameter, lengths ranging from one to seven grouted feet
      • For use with #5 (5/8”) roof bolts in 25mm (1") boreholes
    • E- Series Cartridges: 
      • 32mm (1-1/4") diameter, lengths ranging from one to seven grouted feet
      • For use with #7 (7/8”) roof bolts in 35mm (1-3/8") boreholes

Industry Sectors


Coal Mining


Hard Rock Mining


Tunnelling


Geotechnical

Common Uses


Roof Bolting

Downloads

Technical Data Sheet- A Series
Technical Data Sheet
Safety Data Sheet



// ]]>