Resin Bolts Type HEX36 are designed to be used for roof and ribs support in mine working areas as an independent or additional roof support system. They are also used to attach various components of mining equipment.
Resin bolts type HEX 36 work with the washer to monitor rock mass behaviour.
Forged head lets use standard spanner with hexagonal seat. Forged heads can have also splines shape.
Independent and additional support
Used to attach additional equipment
Forged head of the bolt adjusted to the HEX36 standard
Anchor poles are packed in bundles of 10 pcs or in bundles of 100-300 pcs
The plates are stapled with 10 pcs of wire.
Plates are placed in containers.
Resin Bolts Type APP APG APB
AP bolts are modern design anchors with a load capacity of up to 300 kN and a nut locking system (shear pin). The anchors can be used with three types of washers; a square washer, a round washer or a square washer with an eyelet made of 8 or 10 mm plate.
This product was designed to improve the productivity of ground support installation in underground mining and tunnelling applications. Using the pumpable resin enables the load to be taken up in minutes rather than the typical 24 hours from cementitious grouted systems. Typical applications of CARBOTHIX™ include grouting of cable bolts, solid steel or GFRP bolts, self-drilling anchors and one-step bolting operations in automated mode or for consolidation injection works in direct overburden.