Minostop

Minostop is a rapid setting, water leak plugging mortar for active water-stopping, isolation and reinforcing of walls, floor, and roof of excavations, reservoirs and tunnels.

It is supplied as a ready to use blend of dry powders which requires only the addition of clean water to produce a highly compacted, rapid setting mortar which is easy to apply.

The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of shrinkage cracking.

Product Image
Advantages
  • Resistance to aggressive waters
  • Water- and gas- tightness
  • Rapid-setting
Product Features
  • Suitable for application on damp surfaces or even on an active water
  • Easy and safe to use
  • Has an excellent bond to the substrate
  • It is non-combustible
  • Its compressive strength after 28 days of curing exceeds the 40 MPa

Product Options
  • Packed in 20 kg plastic bucket or 25 kg valve sack

Related Products

Minova Image

Tekflex

The high-strength Tekflex membrane was originally developed according to the TSL (Thin-Sprayed-Liner) technology to serve as an alternative to steel mesh and shotcrete for mining projects. Today, the Tekflex family has expanded and covers many more applications in the civil and tunnelling sectors.

Tekflex products are based on mineral materials with special additives or polymers to achieve sufficient rigidity or required flexibility depending on the type of the application. With just a few mm of thickness, the Tekflex membranes represent an effective, low-cost solution for changing the mechanical parameters of the lining or increasing impermeability. 

 
Minova Image

Tekcrete™ Fast M

Fibre reinforced, this product offers strengths over 55 MPa and can be used in conventional, dry-process shotcrete equipment. It is ideal where immediate structural strength is required.

Tekcrete™ Fast M was developed in response to customer demand for a shotcrete with effectively immediate strength on application. The product can be used with or without steel or polymer mesh, although the mesh will provide additional tensile and flexural strength. Binding broken strata together for better structural integrity, Tekcrete™ Fast M can be used anywhere in a mine where conventional shotcrete is used and as with any coating or sealant.

 

Copyright Minova  All rights reserved.