Capcem™ Anchor Pack is a pourable cementitious anchor grout for fixing of machinery anchoring bolts.
It contains a dry powder blend formulated from cement, graded fillers and additives that impart properties of controlled set and fast strength gain. The product requires only the addition of the supplied liquid to make a free-flowing anchor grout.
Rapid strength gain
Chloride free, non-corrosive
Easy to use
Cement based and solvent-free, nonflammable and non-toxic grout
Rapid strength gain ensures early inservice time
Optimum performance requires rough sided, dry and dust free holes
Mixing may be carried out manually or mechanically
Bonding strength of 20 tonnes at only one hour after mixing
Setting time tested in accordance with SANS 50916-3
Supplied in a 10 litre polyethylene mixing pail containing grout in a polythene bag and liquid in a bottle.
Support where you need it
We provide you with solutions for both active and passive methods of rock support wherever you are.
Our products range from various steel and Glass Fibre Reinforced Polymer (GFRP) bolts to steel arches, meshes and shotcretes.
Our offering can help you with:
Roof and ground control
Permanent and temporary rock bolting
[DSC01634 no logo.png insert photo]
The complete solution.
Bolts alone may not be enough.
Many applications require additional components to ensure the desired results.
We provide steel and GFRP accessories that work in combination with our products for you to achieve the best outcomes. From drill bits, couplings, meshes to plates and nuts and trusses. Our portfolio works to provide you with the right solutions wherever you are.
The Lokset system consists of an easily handled cartridge, containing a highly reinforced polyester resin component, together with its catalyst, in accurately measured quantities.
Reaction takes place when the roof or rock bolt is rotated through the cartridge, mixing the components and initiating the curing action. The chemical nature of the Lokset cartridge allows the contents to be easily mixed, yet minimises resin run-out after mixing is complete.
The setting time of the resin components can be controlled. A combination of fast and slow-setting cartridges makes possible the simultaneous operation of anchoring, grouting and tensioning a rock bolt. The simplicity of this method of anchoring/grouting eliminates the need for cumbersome injection equipment.
The cartridges are designed for rapid insertion into a range of borehole sizes, where they may be readily pushed to the extremity at any angle above or below the horizon