CARBO P-GRUND11

CARBO P-GRUND11 is a high quality single-component polyurethane primer for the precoating of absorbent and non-absorbent underlays.

This product is a solvent- and softener - free primer that converts to a hard and matt film after being exposed to air humidity.

It is used to solidify excoriated floor fringes and for sealing concrete surfaces against contamination with oil, grease, salt, or other chemicals.

Product Image
Advantages
  • Creates an impermeable protective layer
  • Easy and fast application
  • Very low emission
Features
  • It is suitable for surfaces with integrated floor heating
  • It combats capillary rising moisture in cement screeds
  • Applicable at a processing temperature of 15 oC –30 oC and within an air humidity below 65%

Product Options
  • It can be delivered in 5/10 l units.

Related Products

Minova Image

​CARBO SPUR11

It is a high-grade one-component floor adhesive with a polymer basis, that is anhydrous and solvent-free.
Minova Image

CARBO PUR20

Component A is a polyol filled with mineral substances and added processing aids. Component B is a polyisocynate on MDI-basis. After mixing the components, a creamy and easily spreadable adhesive is obtained. After 24 - 48 hours, the parquet adhesive is hardened to a tough, permanent elastic and hydrolysis-resistant adhesive.
Minova Image

CARBO SIL20

CARBO SIL20 is a two-component repair resin. Component A is a special water glass and Component B is a modified polyisocyanate. The curing of component A during the reaction results in a silicate; simultaneously a solid polyisocyanurate/polyurea is formed from the component B.

Copyright Minova  All rights reserved.