Water Stopping and Control

Options include pre-grouting and post-grouting systems with resin and thin spray liners.

Supported Products

Product NameDescriptionDownload
Bevedol®/Bevedan®

Two component foaming PUR injection system for consolidation, stabilisation and sealing of highly convergent wet or dry strata.

Details
CarboCrackSeal NV H and U Resins

The resin has excellent adhesion to dry and wet concrete surfaces. In case of water intrusions which can not initially be stopped with CarboCrackSeal NV, the fast foaming SPUR injection resin CarboStop U can be used to stop the water flow.

Details
Carbocryl Methacrylate Injection System

Carbocryl is a 2 component methacrylate system used for sealing small water inflows and can be applied by several injection methods. The product has a watery consistency and is injected into the structure. It sets as a gel in any pores and fissures which may be present. The treated area then has the strength and waterproofing needed. Carbocryl is solvent-free, giving an environmentally safe solution to these preparations and repair problems.

Carbocryl is well suited to the following applications:

  • Injection barrier for sealing basements against water seepage and ingress
  • Horizontal barrier against rising humidity in brickwork
  • Injection of fissures against oppressive or non oppressive water
  • Pressure sealing of injection hoses
  • Repair of defective tunnel sealing membranes
  • Repair of expansion joints with Carbocryl Wv Plus
Details
Carbomine

Extremely fast reacting two component alkaline phenolic resin injection system with high bond strength for solidification of dry or slightly moist strata.

Details
Carbopur Family

Carbopur is a dual-component injection resin for permanent sealing and consolidation in waterbearing strata.

Details
Carbothix Resin Anchoring Grout

Carbothix™ is an instantly thickening fast curing two component silicate resin for high strength bonding of solid bolts and cable anchors.

Details
Celbex 653

Celbex 653 is ideal for stabilizing cement grouts and cement grout blends, for pumping into cavities or fissures subject to water flow, or for pumping wherever grout has to remain in position without form work. Typical uses include grouting secondary tunnel cavities and grouting fissures and cavities of all types, including granular fill and instances when “stop and stay” grouting is required.

Details
Ekoflex

Ekoflex is used for fire and methane hazard prevention by filling voids, sealing mined-out openings & walkways. It can also be used to build or seal insulation and ventilation dams.

Details
Fosgel Water Absorbent Synthetic Polymer

Fosgel is a super absorbent synthetic polymer which when added to water rapidly forms a highly viscous gel.

The super absorbent properties of Fosgel can be used to absorb free water in working environments where muddy underfoot conditions need to be controlled, such as roadways or developments.

Details
Geoflex Bonding Resin

High performance non-foaming silicate resin for high strength bonding and stabilization.

Details
Geoflex High Strength Bonding Resin

High performance, rapid-curing, non-foaming silicate resin for high strength bonding and stabilization

Details
Geofoam Rapid Expanding Silicate Resin Foam

Rapidly reacting and strongly expanding two component urea silicate resin system for immediate stabilisation via strata injection or cavity filling applications.

Details
Silent Seal®

Minova is an approved and exclusive Australian supplier of Silent Seal,™ a multi purpose two-component expanding resin foam for rapid sealing applications.

Details
Tekcrete Fast M

Tekcrete Fast M* is a specially designed, extremely rapid hardening, high performance gunite. Fiber-reinforced, this product offers strengths over 8,000 psi, and can be used in conventional, dry-process gunite equipment. It is ideal where immediate structural strength is required.

Details
Tekflex®

Minova manufactures and supplies an extensive range of sprayed support and sealing systems for use in a large range of applications in mining and civil engineering, including Tekflex® (TSL – Thin Spray-on Liner).

Details
Tekflex® Black

Tekflex® Black coating is a patented high tensile strength sealant specially designed to permanently stabilize the integrity of rock structures accommodating the stresses associated with strata movement while providing a barrier to moisture degradation.

Details
Tekflex® Dry Spray

Tekflex® Dry Spray coating is a patented high tensile strength sealant specially designed to permanently stabilize the integrity of rock structures accommodating the stresses associated with strata movement while providing a barrier to moisture degradation.

Details
Tekflex® PM

This high strength cement coating is ideal for quickly coating an entryway with a strong durable sealant. Uses include the prevention of spalling from moisture ingress and helping ensure the structural integrity of mine passages. It is an excellent alternative to gunite or shotcrete without the mess.

Details
Tekflex® PM Accelerator

Tekflex® PM Accelerator is specially designed for use in Minova’s Apex continuous placing machine with Tekflex PM. Alternately it may be applied via Minova’s Air Red or Big Red machines. The accelerator causes Tekflex PM to set rapidly.

Details
Tekflex® White

Tekflex® White coating is a patented high tensile strength sealant specially designed to permanently stabilize the integrity of rock structures accommodating the stresses associated with strata movement while providing a barrier to moisture degradation.

Details
Tekgrout®

Tekgrout® injection grout is ideal for the consolidation of fractured strata or loose rock and gravel, and can also be used to control some water flows.

Details
TSL Combo Pump for Thin Spray Liners

A continuous mix and pumping unit electric or air driven for the application of Minova's range of Thin Spray Liners (TSL's) and bagged pumpable grouts.

Details