Infrastructure Repair

Minova provides materials and engineering solutions for infrastructure like pipelines, telecommunications, sewers, water treatment systems, highways, roads, bridges, subway tunnels and light rail transit lines.

Supported Products

Product NameDescriptionDownload
Capcem KT Fast Setting Protective Coating

Capcem KT Fast 2C provides a protective light grey coating to rock, coal, or concrete surfaces which are susceptible to deterioration on exposure. A fast rate of strength development also allows rapid development of support.

Details
Capcem UWP Cementitious Underwater Pumpable Grout

For free flowing or pumped grout to seal wet or underwater substrates without significant ‘washout’ of the cement phase. Applications include crack and fissure sealing in mining and drilling operations and underwater concrete repair.

Details
CarboCrackSeal H Plus

Slow reacting, highly flexible two-component polyurethane resin.

CarboCrackSeal H Plus serves for grouting/sealing and elastic connection of fissures and cavities in buildings and other civil engineering structures constructed from concrete, brickwork or natural stone. Adapted for injection hoses embedded in concrete structures

Details
Carbocryl Methacrylate Injection System

Carbocryl is a 2 component methacrylate system used for sealing small water inflows and can be applied by several injection methods. The product has a watery consistency and is injected into the structure. It sets as a gel in any pores and fissures which may be present. The treated area then has the strength and waterproofing needed. Carbocryl is solvent-free, giving an environmentally safe solution to these preparations and repair problems.

Carbocryl is well suited to the following applications:

  • Injection barrier for sealing basements against water seepage and ingress
  • Horizontal barrier against rising humidity in brickwork
  • Injection of fissures against oppressive or non oppressive water
  • Pressure sealing of injection hoses
  • Repair of defective tunnel sealing membranes
  • Repair of expansion joints with Carbocryl Wv Plus
Details
CarboLith PL

CarboLith PL

  • impregnates fibre glass mats (AdvantexTM) and polyester fleeces well

  • adheres to moist surfaces especially glazed stone ware

  • does not foam, even in the presence of water

  • cures well and fast even in thin layers

  • can easily be demoulded

  • has high resistance to aggressive water, acids as well as alkaline brines, does not hydrolyse

CarboLith PL is a three component system, the curing time of which can be adjusted by the addition of component C.
Details
CarboPox 100

CarboPox 100 is a solvent-free, two-component reactant on an epoxy-resin basis, with its adapted reactivity and the mechanical parameters of cured coatings being especially suited for sewer pipe renovation using the inliner method. It is resistant to ambient moisture and exhibits a long pot life and a good curing speed when heated.

  • soaks polyester needle felt well
  • low viscosity and capillary active
  • high chemical resistance

Details
CarboPox 16

CarboPox 16 is a solvent-free, two-component reactant on an epoxy-resin basis, with its adapted reactivity and the mechanical parameters of cured coatings being especially suited for the sewer pipe renovation using the inliner method. It is resistant to ambient moisture and exhibits a good curing speed when heated.

  • soaks polyester needle felt well
  • low viscosity and capillary active
  • high chemical resistance
Details
CarboPox 60

CarboPox 60 is a solvent-free, two-component reactant on an epoxy-resin basis, with its adapted reactivity and the mechanical parameters of cured coatings being especially suited for the sewer pipe renovation using the inliner method. It is resistant to ambient moisture and exhibits a good curing speed when heated.

  • soaks polyester needle felt well
  • low viscosity and capillary active
  • high chemical resistance
Details
Carbopur WF

Extremely fast reacting, two-component injection resin according to EN 12 71510, CFC-free and halogen-free, for sealing and consolidation in water-bearing strata and against water under pressure.

Details
CarboPur WFA

Extremely fast reacting two-component-injection resin, CFC-free and halogen-free. This resin is designed for sealing and consolidation in water-bearing strata.

  • Consolidation in wet and water-bearing strata

  • Sealing against strong water ingress (also seawater)

  • Sealing against water under pressure e.g. from strata, dams or shaft walls

  • Stabilisation and sealing work in tunnels

  • Repair of old shafts and tunnels

  • Stabilisation of crown abutments in tunnelling

  • Sealing of anchoring of sheet pilings etc. in ground water

  • and many other special applications

Details
CarboPur WS

Extremely fast reacting two-component injection resin according, CFC-free and halogen-free, for sealing and consolidation in water-bearing strata and against water under pressure above 15 °C.

  • Consolidation in wet and water-bearing strata
  • Sealing against water under hydrostatic pressure from strata, dams or shaft walls, also against salt-water
  • Repair of wet shafts, tunnels, channels and walls and many more special applications
  • fulfills fire test to DIN 4102-1-construction material class B2 (normal flammability)
Details
CarboPur WT

Extremely fast reacting two-component injection resin, CFC-free and halogen-free, for sealing against strong water ingress.

  • Sealing against water under hydrostatic pressure from strata, dams or shaft walls, also against salt-water

  • Repair of wet shafts, tunnels, channels and walls

  • Sealing of under water concrete sheet pilings and diaphragm walls

Details
CarboPur WX

CarboPur WX is a slow-reacting 2 component polyurethane resin, free of CFC and non-halogen, for sealing and stabilising in dry and water-bearing areas. Without water contact the injection resin reacts slowly to a high-strength, viscoplastic duromer. CarboPur WX ingress very good in the sealed structures.

It is hydrophobic and initially displaces the water. In the contact area with water, there is a rapid reaction. The resin foams to a compact and viscous foam. CarboPur WX has an excellent adhesion, also on humid grounds. Due to the volume ratio 1:1 a simple and safe processing is possible.

Details
CarboStop 42

CarboStop 42 is an ultra- low viscosity, water-reactive, one-component polyurethane resin. CarboStop 42 is solvent- and CFC- free. To adapt the reaction speed to the situation the accelerator CarboStop 42 ACC is added to the resin and mixed before pumping. The reaction starts after contact with water.

  • Grouting of ultra fine, to very fine sands and porous materials.

  • Deep injection

  • Fixing of anchors, self drilling anchors, drill bolts and cable bolts in water-carrying fine sands

  • Stabilisation and sealing of loose rock

  • Stopping of water inflow (even salt water) under high pressure and speed

  • Injections of man-accessible sewer lines and tubes

  • Injection in simultaneous- or sequential stages during the cement grouting, (Carbo-Grouting System), and or for the automated compounded grouting, i.e resin mixture + reactive, or non-reactive fillers for the filling of large voids under high water transit and pressure (Carbo-Block)

Details
CFT Resin

Instantly setting three component injection resin, CFC and halogen-free. This resin is designed for sealing and consolidation in water-bearing strata.

  • Sealing of accessible sewers

  • Sealing against strong water ingress (including seawater)

  • Sealing against static water pressure e. g. from strata, dams or shaft walls

  • Stabilisation and sealing work in tunnels

  • Repair of old shafts and tunnels

  • Consolidation in wet and water-bearing strata

  • Many other special applications

Details
CT-2

Repair Mortar CT-2 is a one-component material, ready-to- use after mixing with batched water. CT-2 is a cement-based mortar with high quality aggregate up to 2 mm and modified with additives and polymers (PCC / SPCC). The material is dedicated for wet-process spraying as well as for manual repairs of concrete. CT-2 is a part of CT-95 Concrete Repair System.

Details
CT-6

Repair Mortar CT-6 is a one-component material, ready-to- use after mixing with batched water. CT-6 is a cement-based mortar with high quality aggregate up to 8 mm and modified with additives and polymers (PCC / SPCC). The material is dedicated for wet-process spraying as well as for manual repairs of concrete. CT-6 is a part of CT-95 Concrete Repair System.

Details
CT-A/S

Repair mortar CT-A/S is a one-component material, ready-to- use after mixing with batched water. CT-A/S is a cement- based mortar with high quality fine aggregate up to 0,5 mm and modified with additives and polymers (PCC / SPCC). CT- P is a part of CT-95 Concrete Repair System.

Details
CT-D

CT-D is a one-component material, ready-to- use after mixing with batched water. CT-D is a cement-based mortar with high quality aggregate up to 4 mm and modified with additives and polymers (PCC). CT-D is a part of CT-95 Concrete Repair System.

Details
CT-K

CT-K is a one-component material, ready-to- use after mixing with batched water. CT-K is a cement-based mortar with high quality aggregate up to 4 mm and modified with additives and polymers (PCC). CT-K is a part of CT-95 Concrete Repair System.

Details
CT-W

CT-W is a one-component material, ready-to- use after mixing with batched water. CT-W is a cement-based mortar with high quality aggregate up to 2 mm and modified with additives and polymers (PCC / SPCC). CT-W is a part of CT-95 Concrete Repair System.

Details
Powermesh FiReP® FRP Mesh

FiReP® FRP Powermesh was developed to comply with standard grid applications while providing the added benefits of durability or cuttability.

Details
Spinset Anti-Torsion Failure Rockbolt System

The purpose of the new FiReP® SPINSET system is to provide a quick and safe bolt installation for a two step application of FRP Rockbolts for underground mining and tunnelling applications.

Details
Tekcrete Fast

Tekcrete Fast* is a specially designed, ultrarapid hardening, high performance dry process shotcrete (gunite). Fiber-reinforced, this product offers superlative adhesion characteristics and strength over 11,000 psi for use in conventional, dry-process shotcrete (gunite) equipment. It is ideal where immediate structural strength is required.

Details