Tekcrete™ Fast

Tekcrete™ Fast is a specially designed, ultra-rapid hardening, high performance dry process shotcrete for use in conventional, dry-process shotcrete equipment.

TekCrete Fast was developed in response to customer  demand for a shotcrete (gunite) with effectively immediate strength on application. TekCrete Fast may be used with or without steel or polymer mesh, although the use of mesh will provide additional tensile and flexural strength.

Fiber reinforced, this product offers superlative adhesion characteristics with typical compressive strengths over 11,000 psi. It is ideally suited for use where immediate structural strength is required.

Binding broken base material together for better structural integrity, TekCrete Fast can be used anywhere where conventional shotcrete (gunite) is used and with any coating or sealant. It performs best when applied as soon as possible after the base material is exposed. Including rebound, TekCrete Fast has a surface coverage of approximately 8.2 ft2 per 60lb. bag at an application thickness of 1⁄2“.

Product Image
Advantages
  • Ultra-rapid setting and hardening
  • High tensile strength
  • Superior adhesion
Product Features
  • Ultra-rapid rate of strength gain – Structural strength achieved in a few minutes (see Table 1)
  • Safe – The high modulus polymer fibers are safer to handle than steel or fiberglass fibers.
  • High build – Superior adhesion and rapid rate of strength gain allows high build.
  • Fiber reinforced